MegaLite Axis Bedienungsanleitung PDF herunterladen (Seite 5)

www.megawood.com/en/terrace-planner

Using the megawood terrace planner, your dream

terrace can be planned easily and fast online.

GOOD PLANNING

First realization of your terrace ideas

for advice from an expert adviser

GOOD ADVICE

Direct contact to an expert adviser near you

GOOD INSTALLATION

Installation in a video, for optimal

step-by-step installation of your terrace

The ﬁ rst good plan

A perfectly planned terrace requires extensive information. Using the

megawood

terrace planner, you can save, print or email a precise plan of

your terrace project and use this as a basis for detailed consultation from

your specialized wood retailer.

You start by representing the layout of your home and of other relevant

structures. The second step is to place your megawood

dream terrace on

your home and decide for the type of megawood

boards and the colour and

specify the desired installation type and deck structure. This way, various

ideas for your dream terrace can be visualized fast and easily. With only a

few moves, you can now generate a complete material list for your new

megawood

terrace. The dra s are the basis for further consultation with

you specialized wood retailer and are used for cost calculation.

The integrated dealer search on our web site helps you to ﬁ nd a provider

near you comfortably and easily. Enjoy successful planning!

NEW version

in 2014

145m m 145 m m8mm 8mm12 mm

Dimensioning of the terrace deck for a board width of 145 mm.

8mm 8mm12 mm 242m m 242m m

Dimensioning of the terrace deck for a board width of 242 mm (Jumbo).

• According to the principles of constructive wood protection

we recommend that boards should always be installed with

sufficient sloping so that water is moved safely away from the

house. Observing this, you can avoid water stains and dammed-up

water as well as further damage to the building.

• Ensure that the surface below is firm, solid and frost-safe.

Caution! Avoid dammed-up water!

• Avoid contact of the megawood

barefoot boards and of the

construction planks with the ground! The megawood

construction plank is an exception.

• Do not fill out hollow spaces between substructure and bed

plates, so that exchange between warm and cold air is not

prevented. Maintaining specified distances will ensure sufficient

ventilation from below and water is not dammed-up.

• Ensure that drainage is sufficiently dimensioned. Avoid

dammed-up water and ensure full drainage even in case of

torrential rain.

• Keep a minimum distance of 2 cm to fixed components

(e.g. house wall).

• Maintain the specified distances of the construction planks.

• Maintain the specified minimum distances of the expansion

joints so that the structure may expand without resistance if

necessary.

• As a rule, pre-drill all holes.

• Observe installation direction as indicated by the printed arrow

on the packaging label and in the board joint.

• megawood

is a natural material. Deviations in colour and

diﬀ erent hues are a natural result. In addition, they emphasize

the natural appearance of wood. Therefore the boards should

be mixed before they are installed.

• The maximum board distance above the substructure is 5 cm.

• All cutting edges of the barefoot boards should be bevelled

(ca. 3 × 3 mm).

• Do not twist, belt down or force megawood

barefoot boards.

• All installation variants are based on the megawood

construc-

tion manual, because in case of deviations and defects caused

as a result are not subject to warranty.

• Applications that require approval by the construction authorities

must be set up on a sufficiently dimensioned, stable and fall-

through proof construction plank as support for megawood

barefoot boards or on construction planks.

• Production- related measuring tolerances for length, width and

thickness must be taken into account for installation.

• When calculating the number of boards, please use the

following rule of thumb: From the edge of the construction plank

you need 12 mm distance to the first board, then add 153 mm

per board to account for the joints (for 145 mm boards) and

250 mm (for 242 mm boards).

Planning and processing of megawood

Installation direction

To achieve a homogenous surface eﬀ ect, install all boards in the

same installation direction. This is indicated by an arrow in every

board joint and on the packaging label. This way you will prevent

the so-called “lawnmower eﬀ ect”.

TERRACE

PLANNER

When using a smooth-edged board, the width increases by

17 mm.

PRINCIPLES

FOR PLANNING

1 2 3 4 5 6 7 8 9 10 ... 16 17

Kommentare zu diesen Handbüchern

Keine Kommentare

MegaLite Axis Bedienungsanleitung Seite 5

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Flutlichter MegaLite Axis