1 3 4 5
10 cm
5 cm
57 cm
80,5 cm
33,5 cm
0 cm
104 cm
127,5 cm
151 cm
174,5 cm
198 cm
3 cm
189 cm
6
2
7
Sub-structure
1. Make the foundation width and depth following static
requirements and install frost-free.
2. The distance between the axes of the post of a fence field
is 189 cm. After each fifth fence field, set a post at a distance
of 12 cm between axes; this will create an expansion joint of
3 cm. Please ensure at this point, that the elements of the visual
protection will be installed with tension.
3. Position screw-on and concrete-mounted anchors in a way that
the post mounting has at least 5 cm distance from the accumulated
gravel (or ground) and 10 cm to the upper edge of the foundation.
Avoid ground contact of the megawood
®
visual protection.
Installation
4. Push posts onto the sleeve up to the attachment.
5. Push visual protection boards into the groove with the rib
curving down. Install the visual protection boards with tension, so
that the elements can freely expand.
6. Plug post caps onto the post, if necessary use silicone glue for
fixing.
7. The maximum visual protection height with eight visual
protection boards is 198 cm. The height can be adjusted in a grid
of 23.5 cm.
Installation procedure
COMPACT FIX
VISUAL PROTECTION
PRODUCT
OVERVIEW
27 26
Screw-on anchor
COMPACT FIX
40 × 40 mm | L: 40 cm
(120 × 120 mm base plate)
Design: Hot-galvanized
Slit design board
COMPACT FIX
25 × 242 mm | L: 183,5 cm
Diamond design board
COMPACT FIX
25 × 242 mm | L: 183,5 cm
Visual protection board
COMPACT FIX
25 × 242 mm | L: 183,5 cm
Post COMPACT FIX
90 × 90 mm | L: 191 cm
Post cap
COMPACT FIX
Ø 105 mm
Design: Stainless steel
Concrete-mounted anchor
COMPACT FIX
40 × 40 mm | L: 100 cm
Design: Hot-galvanized
Tensile
direction
Kommentare zu diesen Handbüchern